You are here:

Overview

Artist T2.4V is 2 channel Class D amplifier for commercial audio installation.

Artist T2.4V carries the renowned high reliability and outstanding sound performance delivered by AUDIOCENTER system. Both two models are with low impedance output and 70/100V outputs. T2.4V is with ultra compact 1U design and half 19″ rack space enclosure. With customized rack adapter, it allows for single installation or side-by-side (two devices) in a 19” equipment rack. Also can be mounted one table or wall.

Features

Class-D amplifier technology with SMPS, high efficiency
Built-in IC chip to control the input/output channels routing and the output
power accurately
With both low impedance output and 70/100V outputs
Excellent reproduction clarity and outstanding high-definition sound
Optimal cooling system and premium protection system makes extremely high reliability.
Ultra compact 1U design and half 19″ rack space enclosure. Support AUDIOCENTER BrainCore CU processor.
When input signal is lower than the set value for 45 mins, T2.4V/T4.4V will go into energy-saving standby mode.
When input signal is bigger than the set value, it will wake up automatically.

Request For Quotation

Specifications

Output Power（1kHz 20ms Burst THD+N=1%）	8Ω Stereo	2x130W
	4Ω Stereo	2x260W
	8Ω Bridge	1x520W
	Hi-Z(70V)	1x520W
	Hi-Z(100V)	1x520W
Protection System		DC protection / Short circuit protection / Smart overheat management / Overheat protection / Input overload protection /Output overload protection / Soft startup protection / Limiter protection
Working mode		Stereo,Parallel,Bridge,70V/100V
Input Connectors		1×6-pin Euroblock（3.81mm）
Output Connectors		1×4-pin Euroblock（5.08mm）
Input Impedance		≥20kΩ（Balanced），≥10kΩ（Unbalanced）
Maximum input voltage		≥15dBu
Gain		Stereo：26dB； Bridge：32dB； 70V：34dB； 100V：37dB
Frequency response(1W 8Ω stereo)		20Hz-20kHz（±0.5dB）
Crosstalk(1kHz, Rated power 8Ω, A weighted)		≥70dB
S/N Ratio(Rated power 8Ω, A weighted)		≥100dB
Damping Factor (1kHz&8Ω)		≥200
Intermodulation Distortion(60Hz:7kHz=4:1, half power)		≤0.05%
Total Harmonic Distortion(1kHz, half power 8Ω, A weighted)		≤0.05%
Amplifier Type (Output Circuitry)		Class-D
AC Power		100-240V(±10%，50-60Hz)
Power consumption（1/8 output power）		80W
Rack space		1U design and half 19” rack space enclosure
Cooling		Back to front venting,mandatory cooling
Dimension(W×H×D)		218×44×314mm
Net Weight		2.5kg